|
Safe, User
Friendly Diagonal Lap / Shoulder Belts for Series 1, 2 &
3 (1966 to 1978) Alfa Romeo Spiders |
 |
 |
|
This
is what you will receive in the complete package. Note: The stalk
on the left is the better fitting15 cm version. |
The
automatic retractor with all mounting hardware. Retractor adjusts
to any mounting angle. The cover easily snaps into place. Only
one 7/16" hole is required for mounting. |
 
 |
|
(From
left to right) (a) Chief tester Carol, sitting quite prettily
in a Series 2 Alfa Spider, reaches for the convenient 'tongue'
(b) using her left hand to help guide the 'tongue' she then (c)
inserts 'tongue' into female stalk. Note: To help guide the tongue,
without pulling out of the seat guide for taller people, ACS
is now including 'shrink wrap' to insert over the open portion
of the guide. |
    |
(From left
to right) (a) The reel securely attached to the interior of the
rear wheel housing
(b) View is from inside the driver's (left) side wheel well showing
the 3" washer which securely attaches the retractor
(c) The reel with cover, on the left is the rear seat drape,
below the retractor is the rubber convertible top strap
(d) (View is from rear of driver's seat looking towards dash)
The belt guide is one of the key items which makes this installation
so user friendly. The belt easily slips into the guide.
If you have non-original seats, you need to determine if this
attachment will work for you. |
    |
|
Additional photos
taken of a Series 1 (Round-Tail) Spider. The reel can be installed
lower on Series 1 Spiders because there is no top strap bracket
to get in the way.
Note the extension
on the 15 cm stalk. The plated hardware is included should you
care to extend it slightly as it was done on this installation.
|
AlfaCyberSite
Site Map | ACS Accessory Parts Home Page
Pricing / Info for Spider
Series 1 & 2 Diagonal Belts
Cibie
Home Page | Cibie
Replacement Headlamps | Cibie Auxiliary Lighting Units: Rectangular | Round
ACS
Talbot Home Page | Biba Restorations | ACS Home Page |
